DIN Rail Mount Vehicle Loop Detector

  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Easy to install and setup with the ULTRAMETER™ sensitivity display
  • Low current draw – green product
  • Easy identification of interference problems using the crosstalk and RFI interference display
  • Fits into small operator housings, saving space

Overview of Our ULTRA-DIN

The ULTRA-DIN vehicle loop detector combines small size with full-featured functionality in a DIN rail mount module.

The ULT-DIN features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature for our DIN rail mount vehicle loop detector is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.

The ULT-DIN provides relay contact outputs indicating vehicle presence and a set of output contacts for loop fault or pulse on entry/pulse on exit, or DETECT-ON-STOP.

Features of Our ULTRA-DIN Vehicle Detector

  • DIN rail mount – 35mm width
  • ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
  • DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop
  • 10 sensitivity settings
  • 4 operating frequencies
  • Automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence
  • Small size: 80 x 23 x 84 mm
  • Set of output contacts for loop fault or pulse on entry /pulse on exit, or the new EMX feature, DETECT-ON-STOP™
  • CE compliant
Sensitivity 10 levels, 0-9
UltraMETER™ display Indicates optimum sensitivity level, 0-9 Diagnostic aid
Loop frequency 4 settings (low, med-low, med-hi, high)
Loop inductance 20…2000µH (Q factor > 5)
Grounded loop Isolation transformer allows operation with poor quality loops
Automatic tuning Detector tunes to loop on power-up and following frequency count function
Environmental tracking Automatic compensation
Surge protection Loop circuitry protected by surge suppressors
Presence relay SPDT relay contacts (form C)
Output B relay SPST relay contact (form A) (available on ULT-DIN only)
Contact ratings 1A @ 24VDC…120VAC
Power / loop fault indicator Green LED
Detect / frequency count indicator Red LED
Detect On Stop Requires vehicle to stop for a minimum of 1 second (1-2s typical)
ASB (Automatic Sensitivity Boost) Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
Power 12-24VDC/AC
Operating current 15mA standby / 45mA detect
Operating temperature -40°C…82°C (-40°F…180°F) 0…95% relative humidity
Dimensions (L x W x H) 80mm (3.2”) x 23mm (0.9”) x 84mm (3.3”)
Weight 0.25 lbs. (113 g)
Mounting method DIN rail mount – 35mm width
Connections 10 screw terminals

Preformed loop
2×6, 4×6, 4×8, 4×10, 6×10 or 8×12 ft with 50 ft lead

Test loop
1.25 x 1.25 x 0.75 inches

Spec Sheet
Detect-on-Stop Technology

Loop Information

Loop Sizes
Loop Installation
Preformed Loop Spec Sheet
Preformed Loop Manual
Test Loop Instructions

You may also like...

Have Questions?

Have questions or need pricing on one of our products?