Low-Power Vehicle Loop Detector

  • Low power consumption, ideal for solar power applications
  • Reduced energy costs
  • Operates in both fail safe and fail secure modes


  • EMX-2500-1

This product is currently out of stock and unavailable.

LP D-TEK Overview

The LP D-TEK was designed for applications where low power consumption is desired. The LP D-TEK low-power vehicle detector’s low 9 mA current draw makes it ideal for solar applications and gate or door operators that require many accessories drawing from the same power supply.

This unit also offers surge protection and two relays. Contact us today to learn more about the LP D-TEK low-power vehicle detector.


Features of Our Low-Power Vehicle Detector

  • 9 mA current draw standby and detect modes “fail safe”
  • Surge protection
  • Loop isolation transformer
  • Built-in loop conditioner
  • Aluminum RF shield housing
  • Loop diagnostics
  • Frequency counter
  • 2 relays


LP D-TEK Specs

Power Supply 12 – 24 Volts AC/DC
Current Consumption < 9 mA
Operating Temp -40°F to 180°F
Surge Protection Zener Diode /MOV
Output Relays (2) 1Amp 30 VDC
Loop Input Transformer isolation, lightning and transient protection (1)
Loop Inductance Range 20 – 2000 uH Q-factor of 5 or higher
Tuning Automatic on reset or power up
Tracking Automatic for environmental changes
Size Height 3.25” (83mm) Width 2.56” (40mm) Length 3.65” (90mm)
Housing Extruded Anodized Aluminum
Connector 86CP11 11 pin male

Spec Sheet

Loop Information

Loop Sizes
Loop Installation
Preformed Loop Spec Sheet
Preformed Loop Manual
Test Loop Instructions

11 position harness
3 feet of wire

Black, wide profile, 11 pin socket base for DIN rail mount

Black, narrow profile, 11 pin socket base for DIN rail mount

Preformed loop
2×6, 4×6, 4×8, 4×10, 6×10 or 8×12 ft with 50 ft lead

Test loop
1.25 x 1.25 x 0.75 inches

You may also like...

Have Any Questions ?

Have questions or need pricing on one of our products?