IRB-4X2

Thru Beam Photoeye Kit

  • Kit includes transmitter, receiver, integrated protective hoods and removable lens sunshield
  • Thru beam configuration
  • 115 ft. operating range
  • Easy installation and set-up

PART NUMBERS:

  • EMX-1250-1: IRB-4X2 – THRUBEAM PHOTOEYE

EMX IRB-4X2 OVERVIEW

Building on the success of the original IRB-4X, the IRB-4X2 takes a step further by offering advanced features in a smaller and more convenient package.

The IRB-4X2 photoeye is used as a safety, reversing, or opening device in conjunction with automatic operators. The IRB-4X2 will work with any control board that accepts dry contact on the input. The easy to install IRB-4X2 is used with garage doors, rolling doors, parking barriers and other equipment. *Not for use in applications requiring UL325 compliance.

Features of Our EMX IRB-4X2 Photoeyes

  • Works without lenses so it is easy to align
  • Electronic sunlight filter
  • Automatic compensation for temperature changes
  • Capable of penetrating 70% obstruction due to fog, steam and even spray
  • Immune to vibration
  • Does not require additional signal amplifiers or relay boxes
  • IP65 enclosure

Specs

Power 12 – 24volts AC or DC
Current TX = 37mA RX = 23mA standby 17mA detect
Range 5 to 115 ft (35 m)
Response Time 10mS max
Operating Temp -40°F to +170°F
Relay Contact Rating 1A @ 24VDC or 120VAC
Dimensions 3.6” (91 mm) x 2.9” (74 mm) x 2.9” (74 mm)
Gain Adjustment Potentiometer
Conduit Hole Size 0.83″ (21.3 mm) – large enough for 1/2 Inch NPT

Spec Sheet

Manual

You may also like...

Have Any Questions ?

Have questions or need pricing on one of our products?