ULTRA V-2 *Discontinued*

ULTRA V-2 *Discontinued*

Plug-In Style Vehicle Loop Detector

  • Easy to install and set up with the ULTRAMETER™ sensitivity display
  • Compact design
  • Energy efficient
  • Compatible with many gate operators
  • Cost effective
Request Info

ULTRA V-2 Overview

*The ULTRA V-2 has been discontinued. See the ULTRA-PLG as a replacement going forward.*

The ULTRA V-2 vehicle loop detector combines small size with full-featured functionality in a plug-in module.

This plug-in style vehicle loop detector provides a solid-state output indicating vehicle presence. The second output can be used for presence, loop fault or pulse on entry/pulse on exit. In addition, the ULTRA V-2 has options for automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite and normal (5 min.) presence.

The ULTRA V-2 is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER™ display. Ten sensitivity settings allow for finer adjustment of the detection level and four frequency selections help to prevent crosstalk in multi-loop applications.

This plug-in style vehicle loop detector is compatible with a wide variety of gate operators. Please see the spec sheet for a detailed list.

Features of Our Plug-In Style Vehicle Loop Detector

  • ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
  • Frequency count/reset switch
  • 10 sensitivity settings
  • 4 operating frequencies
  • Solid-state output
  • Second output, pulse entry/exit, normal/infinite presence
  • Loop diagnostics
  • Lightning and surge protection
  • Loop fail output
  • Frequency counter
  • ASB (Automatic Sensitivity Boost)
  • Filter
  • CE compliant
Sensitivity 10 levels, 0-9
UltraMETER™ Display Indicates optimum sensitivity level, 0-9 Diagnostic aid
Loop frequency 4 settings (low, med-low, med-hi, high)
Loop inductance 20…2000µH (Q factor > 5)
Grounded loop Isolation transformer allows operation with poor quality loops
Automatic tuning Detector tunes to loop on power-up and following frequency count function
Environmental tracking Automatic compensation
Surge protection Loop circuitry protected by surge suppressors
Detect output Solid-state
Output B Solid state
Output B inverted Solid state
Power / loop fault indicator Green LED
Detect / frequency count indicator Red LED
ASB (Automatic Sensitivity Boost) Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
Power 12VDC…24VDC
Operating Current 15 mA
Operating temperature -40°C…82°C (-40°F…180°F) 0…95% relative humidity
Dimensions (L x W x H) 3.0”(76mm) x 0.9”(22mm) x 2.75”(70mm)
Weight 0.15 lbs. (68 g)
Connector 10-pin female

Preformed loop
2×6, 4×6, 4×8, 4×10, 6×10 or 8×12 ft with 50 ft lead

Test loop
1.25 x 1.25 x 0.75 inches

Spec Sheet

Loop Information

Loop Sizes
Loop Installation
Preformed Loop Spec Sheet
Preformed Loop Manual
Test Loop Instructions