The DAK-2ULTMVP drive-thru alert kit provides an audio and visual indication to team members that need to know when a customer’s vehicle has pulled into the drive-thru lane.
This system can be used in a wide variety of drive-thru applications requiring 2 detection zones, including fast-food restaurants, banking, and car wash.
Standard drive-through alert installations require electricians to order (and take delivery of) each component separately:
The standard shopping list looks like this:
The EMX Drive-Through Alert Kit is a single line-item which includes everything you need:
When you order all of the components separately (ie. without using our kit), everything has to be wired together…
Our kit comes pre-wired, which saves hours of confusing (and accident prone) wiring.
Without the drive-thru-alert kit, both the vehicle detector and signal beacon have dip-switches that need to be configured.
The beacon alone has 32 programmable options.
Our kit comes 100% pre-configured.
The loop detectors and beacon come pre-configured.
The parts inside the box come pre-wired.
The only thing your electrician does is connect external parts (loops, beacon, and 120VAC) as shown in instructions.
The ULT-MVP is a multi-voltage vehicle detector that will automatically adjust from 12 VDC up to 240 VAC to fit any installation.
The PR-46-100 is a ready-to-use, preformed loop with a 100-foot lead that can be shortened or spliced to extend as needed.
The SLM500B is a LED beacon and sounder with three separate levels of alarm.
|Sensitivity||10 levels, 0-9|
|ULTRAMETER™ Display||Indicates optimum sensitivity level, 0-9 Diagnostic aid|
|Loop frequency||4 settings (low, med-low, med-hi, high)|
|Loop inductance||20…2000µH (Q factor > 5)|
|Grounded loop||Isolation transformer allows operation with poor quality loops|
|Automatic tuning||Detector tunes to loop on power-up and following frequency count function|
|Environmental tracking||Automatic compensation|
|Surge protection||Loop circuitry protected by surge suppressors|
|Presence relay||SPDT relay contacts (form C)|
|Output B relay||SPDT relay contacts (form C)|
|Contact rating (resistive load)||2A @ 30VDC, 0.5A @ 125VAC|
|Power / loop fault indicator||Green LED|
|Detect / frequency count indicator||Red LED|
|Detect-On-Stop||Requires vehicle to stop for a minimum of 1 second (1-2s typical)|
|ASB (Automatic Sensitivity Boost)||Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles|
|Power||12…60 VDC (Max. 0.8 VA) 12…240 VAC (48…62Hz) (Max. 1.4 VA)|
|Operating current||20mA standby / 50mA detect|
|Operating temperature||-40°C…82°C (-40°F…180°F) 0…95% relative humidity|
|Dimensions (L x W x H)||73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)|
|Weight||0.25 lbs. (113 g)|
|Housing||ABS plastic, IP30|
|Connections||Socket mount – 11 pin male (JEDEC B11-88)|
EMX INDUSTRIES INC. | 4564 JOHNSTON PARKWAY CLEVELAND, OHIO 44128 | 800‑426‑9912 | © 2021 EMX INC. – ALL RIGHTS RESERVED | MADE IN THE USA